Operating Instructions; Standard Weighing Procedures; Tare Weighing; Cancellation Of Tare Weighing Function - Tanita WB-100MA Mode D'emploi

WB-100MA-取説/04.01.27 04.1.28 9:12 AM ページ10

3.Operating Instructions

1. Standard Weighing Procedures

1. Turn on the power by pressing the
d
2. After all the segments flash, [0.0kg] is displayed.
d
3. Step onto the center of the scale platform.
The weight reading will be displayed.
d
4. Measurement is completed.
When the person being weighed steps off the scale, the display will return to [0.0kg].
d
Turn off the power by pressing the

2.Tare Weighing

1. Turn on the power by pressing the
d
2. After all the segments flash, [0.0kg] is displayed.
d
3. Carefully place the tare items (clothes, etc.) on the center of the platform.
The weight of the items will be displayed.
d
4. Press the
An arrow t[NET] will appear next to the mark and [0.0kg] will be displayed.
d
5. When weighing a person/object including tare items, the weight of the person/object minus that
of the tare items, which is the net weight, will be displayed.
• To change the tare weight, cancel the tare weighing function and repeat from step 3.
• When using the tare weighing function, the measurement range is reduced by the tare weight.
(Measurement Range) = (Maximum Measurable Weight) – (Tare Weight)

3.Cancellation of Tare Weighing Function

1. Remove the tare items (clothes, etc.) from the platform.
The weight will be displayed as a negative value.
d
2. Press the
The arrow tnext to the [NET] will disappear and [0.0kg] will be displayed.
10
key.
key.
key.
key.
key.

4.BMI Calculation:

1. Turn on the power by pressing the
d
2. After all the segments flash, [0.0kg] is displayed.
d
d
3. Push for within two seconds.
d
[0.0kg] and the default height [170cm] will be displayed.
d
4. Set your height with the
(This can also be entered after you step on the scale).
d
Stand still on the scale platform.
The weight will be displayed.
d
5. Once your height and weight have been established, press
The weight and BMI figure will be displayed.
d
* By pressing the
height (and can be changed with the
* The display will return to [0.0 kg] and the default height [170cm], if it changes to a height
display after stepping off the scale during measuring BMI.
Guidelines based on NIH/WHO BMI
Under Weight
Normal Range
Pre obese
Obese
Obese
Obese
key.
key.
.
key in BMI mode, the scale will switch alternately between BMI and
key) display.
BMI ＜ 18.5
18.5 ≦ BMI ＜ 25
25 ≦ BMI ＜ 30
CLASS l 30 ≦ BMI ＜ 35
CLASS ll
35 ≦ BMI ＜ 40
CLASS lll BMI ≧ 40
11