Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
WARNING! Important information!
To avoid risk of fall or suffocation, please follow these instructions carefully.
1. Unlock the one of two zipper heads from the metat ring. Open the side of the crib with the
mesh window using the side zippers. Then open the zipper located at the front end of top rail.
Open them completely.
1
1
2. Release the studs from the tubing and partially remove the tubes. Once this operation has been
performed on both sides, lower the crib side panel and fit it to the base of the crib body using
press studs.
WARNING! Use the crib with the side panel lowered in co-sleeping mode only.
CO - SLEEPING MODE ( FIXING TO BED )
2
2
1
2
4
3
Publicité
Table des Matières
