Description Of The Controls; Before Initial Use; Initial Operation - Clatronic PP 2914 Mode D'emploi & Garantie

• Warning: Danger of fi re!
GB
Keep the unit at a safe distance from easily infl ammable objects such as
furniture, curtains, etc. (30cm)
Oil and fat preparations may burn if overheated.
• Please ensure that the mains lead does not come into contact with the hot
sections of the device. Do not touch the hot sections of the device; please
use the buttons and handles provided.
• Never pour water into hot fat.
• Allow the unit to cool down before you put it away.
• In order to ensure your children's safety, please keep all packaging (plastic
bags, boxes, polystyrene etc.) out of their reach.
1 Glass lid with heat-insulated plastic
knob
2 Contacts for the thermostat
3 Socket for the thermostat
4 Housing cover
5 Handle
6 Hot plate
• Remove the packaging.
• We recommend that you clean the lid and the pan as described under „Clea-
ning".
• Rub the non-stick surface lightly with edible oil.
• Place the device on a heat-resistant surface.
• Please ensure that the temperature regulator (11) is turned to OFF and insert
it into the socket (3) of the thermostat. If the thermostat (7) is not inserted
correctly, this may lead to abnormal heating, of which the consequence may
be damage or accidents. You should therefore ensure that the thermostat is
inserted correctly.
• Connect the device to a properly installed 230 V, 50 Hz power socket.
40

Description of the Controls

7
8
9
10 Mains plug
11 Thermostat control

Before Initial Use

Initial Operation

Thermostat
Temperature sensor - measures
the temperature of the plate
Mains lead