Information For Test Institutes; Settings - ARTHUR MARTIN ASF5512LOX Notice D'utilisation

8
1)
Programme
1) The pressure and the temperature of the water, the variations of the mains supply, the options and the quantity
of dishes can change the values.

Information for test institutes

For all the necessary information for test
performance, send an email to:
info.test@dishwasher-production.com

SETTINGS

Programme selection mode and
user mode
When the appliance is in programme
selection mode it is possible to set a
programme and to enter the user mode.
Settings available in the user mode:
• The level of water softener according to
the water hardness.
• Activation or deactivation of the rinse
aid empty notification.
• Activation or deactivation of AirDry.
As the appliance stores the saved
settings, there is no need to configure
it before every cycle.
How to set the programme
selection mode
The appliance is in programme selection
mode when the programme indicator
is on and the display shows the
programme duration.
After activation, the appliance is in
programme selection mode by default. If
not, set the programme selection mode
the following way:
Press and hold simultaneously
Programme and Options until the
Water
(l)
10
13 - 14
5
Write down the product number (PNC)
that is on the rating plate.
appliance is in programme selection
mode.
How to enter user mode
Make sure the appliance is in programme
selection mode.
To enter user mode, press and hold
simultaneously Départ Différé and Départ
until the indicators
flash and the display is blank.
The water softener
The water softener removes minerals from
the water supply, which would have a
detrimental effect on the washing results
and on the appliance.
The higher the content of these minerals,
the harder your water is. Water hardness
is measured in equivalent scales.
The water softener should be adjusted
according to the hardness of the water in
your area. Your local water authority can
advise you on the hardness of the water in
your area. It is important to set the right
level of the water softener to assure good
washing results.
Energy
(kWh)
0.8
1.0 - 1.1
0.1
Duration
(min)
30
75 - 85
14
, and