Before First Use - ARTHUR MARTIN ASF5512LOX Notice D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Activating options can affect
the water and energy
consumption as well as the
programme duration.
HygienePlus
This option provides better hygiene results
by keeping the temperature at 70 °C for at
least 10 minutes during the last rinsing
phase.
How to activate HygienePlus
Press Options until the indicator
The display shows the updated
programme duration.
XtraDry
Activate this option to boost the drying
performance. With XtraDry on, the

BEFORE FIRST USE

1. Make sure that the current level of
the water softener agrees with the
hardness of the water supply. If not,
adjust the level of the water
softener.
2. Fill the salt container.
3. Fill the rinse aid dispenser.
4. Open the water tap.
5. Start a programme to remove any
processing residuals that can still be
inside the appliance. Do not use
detergent and do not load the baskets.
After starting a programme, it may take up
to 5 minutes for the appliance to recharge
the resin in the water softener. It seems
that the appliance is not working. The
washing phase starts only after this
procedure is completed. The procedure is
repeated periodically.
The salt container
CAUTION! Use rough salt
designed for dishwashers only.
Fine salt increases the risk of
corrosion.
duration of some programmes, water
consumption and the last rinse
temperature can be affected.
XtraDry is a permanent option for all
programmes other than
not to be selected at every cycle.
In the other programmes the setting of
XtraDry is permanent and it is
automatically used in next cycles. This
configuration can be changed at any time.
Every time
XtraDry is off and needs to be
chosen manually.
is on.
How to activate XtraDry
Press Options until the indicator
The display shows the updated program
duration.
The salt is used to recharge the resin in
the water softener and to assure good
washing results in daily use.
How to fill the salt container
1. Turn the cap of the salt container
counterclockwise and remove it.
2. Put 1 litre of water in the salt container
(only for the first time).
3. Fill the salt container with 1 kg of salt
(until it is full).
4. Carefully shake the funnel by its
handle to get the last granules inside.
11
and need
is activated,
is on.

Publicité

Chapitres

Table des Matières
loading

Table des Matières