Settings Overview - Rotel RCX-1500 Manuel De L'utilisateur

16

SETTINGS OVERVIEW

Media Player
FM
DAB
< Settings >
Keep pressing BACK button to back to top-level menu, select Settings
menu. It contains 9 settings sub-menus.Press PREV, NEXT keys to find
hidden menus.
Network Config
1.Scan for networks
( only for wireless connection)
Use the PREV, NEXT keys to select this menu. After entering this menu,
the display will show "Scanning", which will take a few seconds.
Once the network is found, the display will show the network ID. Push
select to confirm.
< Scan for networks >
Enter network name
View Config
Edit Config
2. Enter network name
( only for wireless connection)
If the unit can not find any networks , the network ESSID can be entered
manually.
Use PREV, NEXT keys to select the letters of the device name then select
"END" to confirm the name or hit the REPLY key on the remote or front
panel.
Network Name
< END <> A BCDEFGHIJK >
NAME1
3. View Config
Show current network configuration details. Use navigation keys to
see next/previous page of "Mode"-->"ESSID"-->"MAC Address"-->
"IP Address"-->"Netmask"-->"Gateway"-->"DNS Servers". Display as
below:
< Mode >
Auto DHCP
4. Edit Config
This menu can be used to edit the current network configuration. This
menu is useful for entering a static IP address. Select this function with
the navigation keys and enter the static IP address, MAC address, DNS
of the selected network.
< Network Config >
Version
Upgrade Firmware
Register
Set Time/Date
FM Tuner
DAB Settings
UPnP
WiFi Strength
< ESSID >
XXXXXX
RCX-1500 Stereo Compact Disc Receiver
To enter the value press SELECT then press PREV, NEXT keys. Press SELECT
again to enter the value and move on to the next field. Continue until all
information has been entered.
5. Signal Warning
( only for wireless connection)
Select YES or NO to enable or disable warning of low Wi-Fi signal.
Version
This menu displays software and hardware information of the unit
Upgrade Firmware
Use this option to download new firmware for the internet radio from
the Reciva portal on the Internet. If new firmware is available, there will
be a prompt to download.
Note: At this stage, you can press the BACK button to cancel the firmware
upgrade. A firmware upgrade may take several minutes, do not switch
off the power to the unit or put it into standby until the operation is
complete, otherwise, the unit may become permanently damaged.
Upgrading can take 15 to 60 mins, depending on the speed of your
internet connection.
Register
This will display a key that can be used to register the unit on the Rotel
Radio Customer portal: www.rotelradio.com
Set Time/Date
Set you local time and date. Push SELECT key to start entering value,
push PREV, NEXT keys to change value. Press again to confirm value
entered and move on to the next field..
FM Tuner
Select the FM Tuner region with this function.
DAB Setting
There are 3 sub menus: Scan, Clear List, DAB Region. Please select the
menus by using the PREV, NEXT, SELECT keys.
"Scan" will scan for all available DAB service, it will display list of service
name when successful, or say "no services found " if DAB broadcasting
is not available.
"Clear List" will clear available service list found by "Scan".
"DAB Region" will show regions that provide DAB service, you can select
the desired region with the navigation keys.
UPnP
Use this setting if you wish to change the UPnP device name. This is
the name that your music server will pickup in Media Player mode.
Default name is ROTEL GATEWAY.
Use the navigation keys to select letters of the device name then select
"END" or hit REPLY button to confirm the name.
DEVICE NAME
< END <> A BCDEFGHIJ >
DEVICE
WiFi Strength
Shows a percentage to indicate the WiFi strength.