Epson EB-W16SK Guide De Démarrage page 10

Connecting
Equipment
Connecting the
commander and the
receiver
You need to connect
a USB cable to link the
commander and the
receiver.
10 10 10 10 10
First, connect the power cables and the USB cable.
A
Plug in the power cables for the commander and the
receiver.
Commander
Power inlet
Power cable
(supplied)
Receiver
Power cable
Power inlet
(supplied)
B
Connect the commander and the receiver with the USB
cable.
Connect the commander's USB(TypeA) port to the receiver's
USB(TypeB) port with a USB cable.
The projectors will not be linked if the wrong USB
ports are connected with the USB cable.
Commander
USB TypeA
Receiver
USB TypeB
USB cable
(supplied)