SXT Scooters KIDS Notice D'utilisation page 23

CONNECTORS / HARDWARE
Brake
Check the brakes for proper function. When
you squeeze the lever, the brake should provide
postive breaking action. When you apply the brake
with the speed control on, the brake cut-off switch
should stop the motor. Make sure that brakes are
not rubbing.
Frame, fork and handlebars
Check for cracks or broken connections. Although
broken frames are rare, it is possible for an ag-
gressive rider to run into a curb or wall and wreck
and bend or break a frame. Get in the habit of
inspecting your scooter on a regular basis.
Tires
Periodically inspect the tires for excess wear and
regularly check the tires pressure and re-inflate
as necessary.
Do not use this product for the first time until you have inflated the tires to the
Failure to follow these instructions may damage your product and void your
REPAIR AND MAINTENANCE
Turn power switch „OFF" before conducting any maintenance procedures.
Adjusting the chain
Tight the screw to let the chain touch the chains part, keep the chain in the appropiate state. Please note
the chain can not be too tight. Once the tension is correct, fix the nut. Test ride the scooter, re-adjust if
needed.
INsTrUcTIoNs
correct PSI and charged the battery for at least 15 hours.
warranty.
Note: If you are not familar with it or do not feel
comfortable performing the adjustment, consult the
professioanl service center.
5
Safety gear
Always wear proper protective gear such as an
approved safety helmet. Ellbow pads and knee
pads are recommended. Always wear athletic
shoes (lace-up shoes with rubber soles), never
ride barefoot or in sandals and keep shoelaces
tied and out of the way of the wheels, motor and
drive system.
Battery
Make sure the power switch is turned off whenever
the scooter is not in use. Never store the product
in freezing or below freezing temperatures! Free-
zing will permanently damage the battery.
sxT-scooTErs