User Information - Adidas ADBE-10347 Manuel D'utilisation

User Information

Adjustment
Lift rear upholstery (12)
slightly and extract Pull
pin (45) followed by
Support tube (6). Refit
support tube into required
adjustment hole in Main
uprights and refit Pull
pin. Lower Mount tube
back down onto support
tube. Seat base should
be raised for flat bench
and drppped for all other
positions.
Folding for Storage 1
Fit leg attachment
and ensure all other
attachments are
removed. Remove Knob
bolt M10 (42) and bolt
(25). Lift rear upholstery
(12) slightly and extract
Pull pin (45) followed by
Support tube (6). Lower
rear upholstery to base.
Folding for Storage 2
Rotate main tube to
upright position.
continued on next page.