Optoma EH460 Manuel D'utilisation page 98

Annexes
N N
ote ote
Ce projecteur est
pleinement conforme
aux spécifications de
JBMIA PJLink™ Class
1. Il prend en charge
toutes les commandes
définies par PJLink™
Class 1, et la
conformité a été vérifiée
avec les spécifications
de la norme PJLink™
Version 1.0.
98
Command Description
INPT? Inquiry about input
switching
AVMT Mute control
AVMT? Inquiry about the mute
state
ERST? Inquiry about the error
state
LAMP? Inquiry about the lamp
state
INST? Inquiry about the
available inputs
NAME? Inquiry about the
projector name
INF1? Inquiry about the
manufacturer name
INF2? Inquiry about the model
name
INF0? Inquiry about other
information
CLSS? Inquiry about the class
information
Remark (Parameter)
12 = VGA2
13 = Component
14 = BNC
21 = VIDEO
22 = S-VIDEO
31 = HDMI 1
32 = HDMI 2
30 = Video and audio mute disable
31 = Video and audio mute enable
1st byte: Fan error, 0 or 2
2nd byte: Lamp error, 0 to 2
3rd byte: Temperature error, 0 or 2
4th byte: Cover open error, 0 or 2
5th byte: Filter error, 0 or 2
6th byte: Other error, 0 or 2
0 to 2 mean as follows:
0 = No error detected, 1 = Warning,
2 = Error
1st value (1 to 5 digits): Cumulative
LAMP operating time (This item
shows a lamp operating time (hour)
calculated based on that LAMP
MODE is LOW.)
2nd value: 0 = Lamp off, 1 = Lamp on
The following value is returned.
"11 12 21 22 31 32"
The projector name set on
the NETWORK menu or the
ProjectorView
Setup window is returned
"Optoma" is returned.
"EH7700" is returned.
No other information is available. No
parameter is returned.
"1" is returned.