Troubleshooting - TOOLCRAFT T-WS125 900W Notice D'emploi

Tips on use
Risk of injury! Never use cutting discs for abrading.
Risk of injury!The abrading disc and work piece become very hot during use. Let the abrading disc and
work piece cool down completely before touching them.
Risk of injury! Always grind with the specified surfaces:
Cutting discs: Peripheral surface; Grinding disc, grinding wheel: Side surface.
• Always clamp the work piece firmly.
• Never tilt the appliance when cutting materials.
• Never apply excess pressure to the appliance.

8. Troubleshooting

By purchasing this angle grinder, you have acquired a product design to the state of the art and operationally reliable.
Nevertheless, problems or errors may occur.
The following contains description for the removal of possible interference.
Always observe all safety information in these operating instructions.
Problem
Appliance is not running.
Insufficient performance.
26
Solution aid
• Check the cable, plug, socket and the fuse.
• Contact your local market.
• Fit a suitable abrading disc.
• Fitting the abrading disc.