Zipper ZI-RWM99 Mode D'emploi page 25

SPECIAL "S" FUNCTION
This function is used for unusually shaped alloy rims where "ALU2 " is not able to guarantee sufficient accuracy.
Select the S option (relative) LED lights up through the "ALU" push button.
-
Take note of the dimension following the diagram given below:
-
SEQUENCE:
1. To modify al press
2. To modify aE PRESS
3. To modify dl press
N.B: by default dE is = 0.8dl
4. To change dE press
When dl is reselected, the system automati-
cally returns dE= 0.8dl
OPTIMIZATION OF UNBALANCE
-The functions servers to reduce the amount of weight to be added to the wheel to balance it.
-It is advisable for static unbalance exceeding 30grams.
-In many cases an improvement of the residual eccentricity of the tire can be achieved.
-The operations listed below should be carried out with great care in order to obtain the best possible results.
N O T E
Abb. 6
Keep ALU pressed
The system calculates automatically the distance between the
centers of gravity of the weights considering them to be
about 14mm wide. To displace the unbalance associated with
preset dimensions, press key "C". If a spin has already been
made, the system automatically recalculates the unbalance;
otherwise press the "START" for a new spin.
(Press STOP if the function is to be deleted)
25