Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
15
GENERAL SAFETY RULES
d. Before operation:
Carefully read the operation manual before using the machine.
Checking the voltage, and frequency instructing on motor plate, wiring must be done by electricians
only.
e. Using the machine:
The machine must be operated by trained staff and can only be used for purpose described in this
manual.
Do not wear unfit clothes such as large clothes with flounces, tires, etc; which could get caught by
moving parts of the machine.
f. After use:
Do not modify the machine without manufacturer's advice.
Do not use strong jet of compressed air for cleaning.
Use Alcohol to clean plastic panels, but avoid contaminating important board inside.
If the machine is not to be used any more, owners are suggested to make it unusable by removing
the power supply connections, emptying the oil tank and disposing the liquids in accordance with the
national laws in force.
TRANSPORTATION
The tire balancer must be transported in its original packing and kept in the position shown on the
package itself.
The packed machine should be moved by means of a forklift truck of suitable capacity. Insert the
forks at the points shown in Abb. 2
CONTROL PANEL
Abb. 1
1
Digital display of inside unbalancing value
2
Digital display of out unbalancing value
3
Indicator, inside unbalancing position
4
Indicator, outside unbalancing position
5
Indicator, correction mode selected
6
Push button for unbalancing value <5g / 0.035
7
Push button, correction mode selection
8
Push button, recalibration/ self-calibration
9
Push button, manual input of DISTANCE
10
Push button, manual input of WIDTH
11
Push button, manual input of DIAMETER
12
Push button, optimization of unbalance
13
Push button, Shift between DYNAMIC/STATIC
14
Push button, Start
15
Push button, EMERGENCY STOP
21
Publicité
Table des Matières
