SEVERIN ‎SM-3733 Mode D'emploi page 11

approximately 5 minutes until it has reached
room temperature. When using the chopping
attachment, do not operate for more than
10 seconds at settings I or II, after which
it should be allowed to cool down for
approximately 5 minutes for the appliance to
cool down to room temperature.
Operating button
The blender is equipped with 2 push-type
operating buttons.
Operating button I: low power
Operating button II: high power
Blender operation
∙ When fi tting the blender attachment to
the drive unit, ensure that the arrow mark
and the open-lock symbol are aligned: to
lock, turn the blender attachment so that
the arrow on the drive unit is aligned with
the closed-lock symbol on the attachment.
∙ Always use a suitable container for
operation. Any tall container with a fl at
base is suitable.
∙ Push the blender attachment down
into the ingredients in the bowl before
switching the unit on with the operation
buttons.
∙ Make sure that the attachments can
rotate freely inside the bowl and are not
blocked during operation.
∙ As soon as the operating button is
released, the blender will switch off.
Always wait until the motor has come to
a complete standstill before lifting the
blender attachment from the mixture.
∙ Remove the plug from the wall socket
after use.
Attachments
Wait until the motor has come to a complete
standstill and remove the plug from the wall
socket before changing any attachments.
The attachments are fi tted to the drive unit.
Ensure that the arrow markings on the drive
unit and attachments are correctly aligned.
Chopping attachment
∙ Fit the cutting blade unit into the bowl
before fi lling the bowl with the food to be
chopped. Exercise extreme caution:
The blades are very sharp. When
handling the blades, always hold them by
the upper protective plastic covering.
∙ Position the lid on the bowl and lock it by
turning clockwise until it locks into place.
∙ Attach the drive unit to the lid of the bowl
and turn to lock; ensure that the arrow
and closed-lock symbols are properly
aligned.
∙ Insert the plug into the wall socket and
press the operating button in brief bursts
until the mixture has reached the desired
consistency. During processing, the lid
and bowl should be securely held in
place.
∙ Avoid overfi lling the bowl; it may be fi lled
with herbs etc. up to the maximum mark.
Before the bowl is fi lled, the food to be
processed should be cut into pieces of
about 1 cm.
∙ Do not fi ll the bowl with hot liquid or
very hard material such as ice cubes,
nutmegs, hard grain, coffee beans, hard
cheese, chocolate, rice or spices. The
appliance is designed to process food
items such as raw meat, cheese, herbs,
walnuts, almonds and plums.
∙ After processing, always remove the plug
from the wall socket before taking the lid
off or detaching the drive unit. To detach
the unit, turn it so that the arrow mark and
11