SEVERIN ‎SM-3733 Mode D'emploi page 10

∙ The individual attachments should be
cleaned after each cycle of use. For
detailed information, please refer to
the section Cleaning and care.
∙ The blades are extremely sharp.
To prevent injuries, take special
care while emptying or cleaning the
processing bowl, and when cleaning
the blender attachment.
∙ Caution: Any misuse can cause
severe personal injury.
∙ Always remove the plug from the wall
socket
- before assembling or
disassembling the appliance,
- in case of any malfunction,
- when there is no supervision,
- after use,
- before cleaning the appliance.
∙ This appliance is intended for
domestic or similar applications,
such as
- by staff members in shops,
offi ces and other similar working
environments,
- in agricultural working
environments,
- by customers in hotels, motels etc.
10
and similar establishments,
- in bed-and breakfast type
environments.
∙ Caution: Keep any packaging materials
well away from children – these materials
are a potential source of danger, e.g. of
suffocation.
∙ Every time the appliance is used, the
main body including the power cord as
well as any attachment fi tted should
be checked thoroughly for any defects.
Should the appliance, for instance, have
been dropped onto a hard surface, or if
excessive force has been used to pull the
power cord, it must no longer be used:
even invisible damage may have adverse
effects on the operational safety of the
appliance.
∙ Do not allow the appliance or its power
cord to touch hot surfaces or to come into
contact with any heat sources.
∙ During operation, the appliance should be
placed on a scratch-resistant surface.
∙ No responsibility is accepted if damage
results from improper use, or if these
instructions are not complied with.
Before using for the fi rst time
Before the appliance is used for the fi rst
time, all detachable parts must be thoroughly
cleaned as described in the section Cleaning
and care.
Short-term operation
The appliance is designed to process
average domestic quantities of food. With
the blender attachment, it can be operated
without interruption for a maximum of 60
seconds at settings I or II, after which
it should be allowed to cool down for