Dometic Classic 1 Notice D'utilisation page 13

Classic
➤ Attach the side panels:
– Hang the side panel (3) in the slot in the upper part of the portable grill (1) (A).
– Fold it down.
– Hook the side panel onto the front of the grill base (B).
A
NOTICE!
Never use the device without the drip tray. Without a drip tray the signs
in the base of the portable grill could get dirty, damaged from the heat
and illegible.
➤ Always slide the rack in at the required height together with the drip tray (4).
➤ If required, insert the roasting spit (5) into the rails on the side panels.
8.2 Installing the burner
Proceed as follows (fig. 2, page 3):
➤ Place the burners (7) onto the side panels.
➤ Insert the injector (6) into the burner (7) until you hear it click.
8.3 Connecting the portable grill to the gas cylinder
!
WARNING! Beware of injury
• Only use propane or butane gas cylinders with an approved
pressure reducing valve and a suitable head.
• Compare the pressure information on the type plate with the
information on the pressure reducing valve.
Proceed as follows (fig. 3, page 4):
➤ Place the gas cylinder (1) upright and at least 50 cm away from the portable grill.
➤ Check that the valve (2) on the gas cylinder is closed.
➤ Screw the pressure reducing valve (3) onto the gas cylinder firmly by hand.
➤ Make sure that the gas hose
– is not crushed or kinked
– is a safe distance from the burner
➤ After connecting the device to the gas supply, check the gas pipe for leakage
using a foaming agent, e. g. with soap.
EN
Using the portable grill
13