Temperature Taking Hints - Braun NTF 3000 Mode D'emploi

Masquer les pouces Voir aussi pour NTF 3000:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 38
Position
3
Position thermometer on or up to 5 cm away from the
center of the forehead, just between the eyebrows.
For No touch readings, the yellow guidance light will
show you where you are aiming. If the eyebrow area is
covered with hair, sweat or dirt, please clean the area
beforehand to improve the reading accuracy. It is important
to hold the thermometer and the forehead steady during
measurement. Movement will impact the temperature
reading.
Take temperature
4
Press the temperature button (you can press and hold the button or press and
release it). When the thermometer is placed correctly, the screen displays a dashed
line animation while it takes a reading. After the animation sequence (under 2
seconds), the display shows the temperature reading. The appropriate fever light
color is displayed on screen and the coni rmation beep is heard.
If the thermometer is positioned too far away from the forehead, it will prompt you
to move the thermometer closer by displaying diagram and "0-5 cm". Slowly move
the thermometer toward
the forehead until the horizontal line
animation starts and the temperature
reading is displayed.
6
0 - 5 cm
Yellow light
will show
you where
you are
aiming.
Read temperature
5
Remove the thermometer and read the temperature.
For low (no backlight) and acceptable (green backlight)
temperature range, you will hear a single long beep for 2 seconds.
For elevated (yellow backlight) and possible high fever (red
backlight) temperature range, you will hear 10 short beeps.
To repeat
Go to step 3.
To turn of
6
Press the power button to turn of . Device will also shut of automatically after 60 seconds of no use.

Temperature taking hints

It is important to know each individual's normal temperature when they are well. This is the only way to
accurately diagnose a fever. Take multiple readings when healthy to determine normal temperature.
A child's normal temperature can be as high as 37.7 °C (99.9 °F) or as low as 36.1 °C (97.0 °F). Be sure to note this
unit reads 0.5 °C (0.9 °F) lower than a rectal digital measurement.
Patient must be inside for 30 minutes before taking a measurement.
Note: Patient and the thermometer should be in the same ambient temperature for at least 10 minutes.
Always hold the thermometer and the forehead steady when taking a reading. Do not move the
thermometer until you hear the i nal beep. Don't take a measurement while or immediately after nursing
a baby.
Patients should not drink, eat, or be physically active before/while taking the measurement. Remove hats
and wait 10 minutes before taking a measurement.
Before taking a measurement, remove dirt or hair from the forehead area. Wait 10 minutes after cleaning
before taking measurement.
Always take the temperature exactly as directed. Temperature results may vary if positioned in the wrong
location.
For patients measuring their own temperature, it is recommended to use the "touch" option instead of
"no touch. "
Red
High
Yellow
Elevated
Green
Normal
7

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Ntf 3000we

Table des Matières