Sharp CV-P10PR Manuel D'installation Et D'utilisation page 9

4
Attach the exhaust hose to the
unit.
Insert the two projections into the two
holes on the unit, and firmly attach them
to each other until they click.
5
Lead the exhaust hose outdoors.
The exhaust hose should be as short as possible for operational
efficiency; however, it must not be twisted or bent.
Unacceptable
Removal of the exhaust hose
Remove the exhaust hose from the unit.
Lift up and remove the exhaust hose from the
unit by pushing on the two projections.
Acceptable
EN-7
Exhaust hose
Projection
Hole
Acceptable
Exhaust hose
Projection