emerio MO-111999.1 Mode D'emploi page 6

MO-111999.1
PARTS DESCRIPTION
1. Temperature knob
2. Function knob
3. Timer knob
4. Indicator light
5. Wire rack
6. Baking tray
7. Tray handle
BEFORE USE

Remove all packaging materials from the appliance. Clean the appliance according to the section "How to
clean" below.

Make sure the appliance is unplugged and the timer knob is set at position "0".

Before initial use, it is recommended that you run the oven with the function "
minutes to eliminate the remaining packing residue and odor.
OPERATION
1. Place the appliance on a flat and heat resistant surface. Make sure that there is enough ventilation around
the appliance.
2. Insert the power plug into the socket.
3. Slide the wire rack with food into the slot of the appliance. And then slide the baking tray under the wire
rack to collect the dripping oils. You can also directly put food on the baking tray itself. Choose your desired
rack position according to the food height and type.
4. Close the oven door, and turn the function knob to choose the desired function "
heat.), " " (The bottom element will heat.), or "
Turn the temperature knob to choose the desired temperature.
5. Turn the timer knob to select desired cooking time. The indicator light will be on.
6. When the cooking is finished, you will hear the timer bell ring. You can also switch off the appliance manually
by turning the timer knob to "0". The indicator light will be off.
7. When finished cooking, turn the oven function knob back to position "OFF".
" (Both top and bottom elements heat simultaneously.).
- 5 -
EN
" for approximately 15
" (The top element will