BEHA UNITEST CHB 140 Mode D'emploi page 14

Symbols on the instrument and in the instruction
manual:
Warning! Warns of potential danger, comply with the
Instruction manual.
Caution! Dangerous voltage. Danger of electrical
shock.
Continuous double or reinforced insulation complies
to IEC 536, Class II
Symbol of conformity, confirms conformity with rele-
vant EU directives. The instrument complies with the
EMC Directive (89/336/EEC) specifically standards EN
50081-1 and EN 50082-1, as well as the Low Voltage
Directive (73/23/EEC) described in the standard EN
61010-1.
Introduction
The digital Current Clamp is a universal current measure-
ment clamp. The measurement instrument has been built in
compliance with the most up-to-date Directives EN 61010,
IEC 61010 and ensures safe and reliable operation. The
clamp-on Ammeter is a useful aid to the electrician on site,
the service technician in industry and handicraft or for
hobby electronics to carry out maintenance work, new in-
stallations, commissioning, as well as fault finding.
Features
• Small, handy AC Current Clamp up to 400A
• Measurements also in small compact systems with very
limited space available without interruption lines
• 3 3 / digit LCD, maximum 3999 digits
4
• Data Hold Function
• Min/Max Function
• Voltage measurement AC/DC up to 600V
• Clamp opening 28mm
14