Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
1.2 Outdoor unit and sensor unit:
1
2
Sensor unit
8
1. wind vane
2. wind speed meter
3. outdoor unit support
4. rain meter
5. rain drain
6. Post
7. plastic feet base
8. connecting cable (wind and rain sensor to outdoor
transmitting unit)
9. °C and °F selection button
2. INSTALLATION
Attention: after the installation, it may take several hours up to a day before the correct values are
displayed. Additionally, after replacing exhausted batteries in the weather station, all measured data in the
weather station will be erased.
2.1
Power supply:
Advice regarding batteries:
We advise you to use normal 2 x 1.5V AA (LR6) alkaline batteries of high quality for the weather station.
Alkaline batteries with a capacity of 2000mAh have a lifespan of over one year.
Rechargeable batteries are not recommended because of their lower supply voltage.
Also the outdoor unit is powered by 2 x 1.5V AA (LR6) batteries, but because normal Alkaline batteries
perform poorly or not at all at temperatures of around or below 0°C, it's not recommended to use standard
Alkaline batteries for the outdoor unit.
For that reason, we advise you to use Lithium batteries for the outdoor unit that are designed to function
well within a temperature range of -20°C to 60°C. These batteries can be ordered via the service
department of Alecto via internet: www.alecto.nl
Lithium batteries with a capacity of 2900mAh have a lifespan of over one year. When the
the display of the weather station, the batteries of the outdoor unit need replacement.
3
4
5
6
7
9
10
°C/°F
RESET
11
12
Outdoor unit
10. outdoor unit reset button
11. connection for wind and rain sensor
12. outdoor unit battery compartment
13. outdoor temperature display
14. transmission indication
15. suspension hole
16. outdoor humidity
17. temperature sensor
18. humidity sensor
33
13
14
15
16
17 18
icon appears in
Publicité
Table des Matières
