Connections And Controls; Technical Specifications - HQ Power PROMIX3000 Mode D'emploi

5. Connections and Controls

Top panel (fig.1)
1. Microphone controls (level, high/low, pan)
2. Channel GAIN & tone controls (high/mid/low)
3. Master controls: level & balance
4. Cue controls: level & mix ch1/ch2
5. Line/CD switches
6. Power LED
7. VU-meter (white and blue LEDs)
8. Channel faders
9. 6.3mm microphone connection (on front panel)
10. Cross fader
11. 6.3mm headphones connection (on front panel)
Always set all faders and volume (level) controls to 0 before switching on the device!
Rear panel (fig.2)
a. Power Switch
b. Power input
c. Master output
d. Record output
e. CD 2 input
f. Phono/line 2 input
g. Phono/line switch channel 2
h. CD 1 input
i. Phono/line 1 input
j. Phono/line switch channel 1

6. Technical Specifications

Power supply
Microphone input
Phono input
Line input
Master output
Record output
Frequency response
Distortion
S/N Ratio
Talkover attenuation
Headphone impedance
Dimensions
Weight
Ambient temperature
The information in this manual is subject to change without prior notice.
PROMIX3000 – 2-KANAALS STEREO MENGPANEEL
1. Inleiding en kenmerken
Dank u voor uw aankoop! Lees deze handleiding grondig voor u het toestel in gebruik neemt. Als het toestel werd
beschadigd tijdens het transport, installeer het dan niet en raadpleeg uw dealer.
PROMIX3000
12Vdc / 300mA (adapter included)
1.5 mV / 400
3mV / 50k
150 mV / 50k
0dB / 755mV / 600
0dB / 755mV / 600
20Hz ~ 20kHz ±2dB
0.02%
> 80dB
-12dB
300mV / 16
320 x 210 x 40mm
2 kg
5-35°C
Fig.1
2
Fig.2
VELLEMAN