Monitoring Via Headphones; Care And Maintenance - HQ Power HQMX11010 Mode D'emploi

6.3 Talk-Over
When making an announcement while a music programme is played, switch on the
talk-over function for the microphone at channel MIC 1 with the TALKOVER button
(10) to improve the audibility of the announcement. When the button is pressed
(LED above it lights up), the levels of the stereo channels 1 to 4 are automatically
attenuated by 16 dB while announcements are made via the microphone. Disengage
the button to switch off the function.
The level attenuation always affects all three master channels even if the microphone
channel MIC 1 has not been assigned to all master channels via the routing buttons
Z1 to Z3 (13).
6.4

Monitoring via Headphones

The PFL function (pre-fader listening) allows you to monitor each of the stereo input
channels 1 to 4 via headphones connected to the jack PHONES (4), even if the
corresponding fader (18) is set to minimum. This will allow you, for example, to
select the desired title on a CD or to time the moment for fading in an audio source.
Alternatively, it is also possible to monitor each individual master channel ahead of
its level control (24).
1. For pre-fader listening to an input channel, press the button PFL (16) of the
channel (LED above the button lights up).
For monitoring a master channel ahead of the master level control, press the button
PFL (25) of the channel (LED above the button lights up).
2. Adjust the desired headphone volume with the control PHONES (3).
7.

Care and Maintenance

Before starting any cleaning or maintenance activities:
1. Unplug the appliance from the mains.
2. Let the appliance cool down.
Cleaning
•
Wipe all exterior surfaces of the appliance clean with a soft cloth dampened with a
soap and water solution. Do not immerse or submerge any part of the appliance in
water or any other liquid. Never use solvents or cleaning agents containing
petroleum (petrol, kerosene, oil), paint thinner, turpentine, alcohol, or ammonia.
Maintenance
•
Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or has
been dropped.
Storage
•
Store the appliance and its accessories in the original package in a clean and dry
area.
V. 02 – 10/05/2021
HQMX11010
10 ©Velleman nv