ARTHUR MARTIN AW6F3844BB Notice D'utilisation page 23

1. The SensiCare System starts
estimating the weight of the load to
calculate the real programme duration.
During this phase the Time Manager
bars placed below the time digits
play a simple animation.
2. After about 15-20 minutes the Time
Manager bars disappear and new
cycle duration is displayed.
The appliance automatically adjusts
the programme duration to the load to
achieve perfect washing results in the
minimum possible time.
Interrupting a programme and
changing the options
When the programme is running, you can
change only some options:
1. Touch the button Départ/Pause
The related indicator flashes.
2. Change the options. The given
information in the display changes
accordingly.
3. Touch the button Départ/Pause
again.
The washing programme continues.
Cancelling a running
programme
1. Press the button Marche/Arrêt to
cancel the programme and to
deactivate the appliance.
2. Press the button Marche/Arrêt again to
activate the appliance.
If the SensiCare System has
completed and the water filling
has already started, the new
programme starts without
repeating the SensiCare
System. The water and the
detergent are not drained out in
order to avoid waste.
There is also an alternative way of
cancelling:
1. Rotate the selector knob to the "Reset"
position .
2. Wait for 1 second. The display shows
.
Now, you can set a new washing
programme.
Opening the door - Adding
garments
If the temperature and level of
the water in the drum are too
high and/or the drum is still
rotating you cannot open the
door.
While a programme or the delay start
operates, the appliance door is locked.
1. Touch the button Départ/Pause
In the display the related door lock
indicator goes off.
2. Open the appliance door. If necessary,
.
add or remove the items.
3. Close the door and touch the Départ/
Pause
The programme or the delay start
continues.
End of the programme
When the programme has finished, the
appliance stops automatically. The
acoustic signals operate (if they are
active). The display shows
The indicator of the Départ/Pause
button goes off.
The door unlocks and the indicator
goes off.
1. Press button Marche/Arrêt
deactivate the appliance.
After five minutes from the end of the
programme, the energy saving function
automatically deactivates the appliance.
When you activate the
appliance again, the display
shows the end of the previous
programme. Turn the
programme dial to set a new
cycle.
button.
23
.
to