Abicor Binzel iROB Control Mode D'emploi page 39

iROB Control
Symbol Number
BAL.0333.0 • 2017-08-31
Designation
(1) • Used for display of information. The display is divided into a header
area, a display of the welding parameter and a function area.
LC display
(2) • Lit when the robot welding system has been connected to the power
supply and is on.
Readiness LED
(3) • Lit when an error has occurred. The 7-segment display of
iROB Pulse and iROB Control (5) displays the error code.
Alarm LED
 10 Troubleshooting on page EN-20
(4) • Lit when a welding voltage has been applied to the output or
welding sockets.
Welding current LED
(5) • Shows values of the assigned parameters.
7-segment display
• Shows error codes.
(6) • Turning it will change the selection on the LC display.
<Selector switch>
• Pressing it will confirm a selection.
(7) • Provides 64 memory locations for saving and loading settings.
<Key >
(8) • Allows the selection of characteristics.
<Key >
(9) to (12) • Keys whose functions change. The relevant function is displayed in
the function area of the LC display.
<Softkeys>
7 Operation
EN - 11