Optional Accessories - Berner BCLL TOP Notice D'utilisation

• If the detector is still not making any sound, take it to a Berner
service centre.
THE DETECTOR DOES NOT RESPOND TO THE BEAM FROM ANOTHER
LASER UNIT
• BCLLD is designed exclusively for use with the BCLL BASIC
and BCLL TOP line lasers and other compatible B
line lasers.
• BCLLD-G is designed exclusively for use with the BCLL-G
BASIC and BCLL-G TOP line lasers and other compatible
B rner Green line lasers.
e
THE DETECTOR GIVES OFF A TONE BUT THE LCD DISPLAY WINDOW
DOES NOT FUNCTION
• If the detector is very cold, allow it to warm up in a heated
area.
• If the LCD display window is still not functioning, take the
detector to a Berner service centre.
BRIGHT LIGHT SHINING ON DETECTOR CAUSES CONTINUOUS "ON-
GRADE" SIGNAL
• In the presence of very intense ambient light, the detector may
give a false or erratic indication of level.
• Reposition the detector out of the intense light or shade the
sensor window (u) to resume normal operation.

Optional Accessories

USING THE LASER WITH ACCESSORIES (FIG. 1 INSET)
The laser is equipped with a 1/4" × 20 female thread (i) on the
bottom of the unit. This thread is to accommodate current or future
Berner recommended accessories. Only use Berner accessories
specifi ed for use with this product. Follow the directions included
with the accessory.
Consult your Berner Partner for further information on the
appropriate accessories.
ENGLISH
rner Red
e
27