Using The Laser - Berner BCLL TOP Notice D'utilisation

ENGLISH
a. Battery compartment cover
b. Red indicator light
c. ON/OFF button, horizontal laser line
d. ON/OFF button, vertical laser line
e. ON/OFF button, side vertical laser line
f. Magnetic pivot bracket
g. Keyhole slot
h. Fine adjustment knob
i. 1/4" × 20 female thread
INTENDED USE
The crossline laser
to project laser lines to aid in professional applications. The tool
can be used for horizontal (level), vertical (plumb) and square
alignment. The applications range from layout of walls and windows
to installation of framing track.
DO NOT use under wet conditions or in presence of fl ammable
liquids or gases.
The crossline laser is a professional tool. DO NOT let children
come into contact with the tool. Supervision is required when
inexperienced operators use this tool.
OPERATION
To Turn the Laser On and Off (fi g. 1)
With the laser off , place it on a fl at surface. This model has
three ON/OFF buttons, one for a horizontal laser line (c), one for
a vertical laser line (d) and one for a side vertical laser line (e).
Each laser line is powered on by pressing its ON/OFF button.
The laser lines can be powered one at a time or at the same time.
Pressing the ON/OFF buttons again turns the laser lines off .

Using the Laser

The beams are level or plumb as long as the calibration has been
16
BCLL TOP/BCLL-G
TOP has been designed