Warranty Provisions; Property Rights / Trade Names / Disclaimer - Rohde KE 55 LN Mode D'emploi

Enjoy your results

9. WARRANTY PROVISIONS

We guarantee excellent manufacturing and functionality of the kiln and provide a 36-month warranty from date of
invoice.
In addition to the heating elements (parts subject to wear) the following are excluded from the scope of warranty:
• Damage caused by the customer such as broken bricks in the firing chamber.
• Damage caused by the fired material, e.g. due to temperature limits being exceeded.
• Damage caused by improper transport.
• Damage due to chemical reactions during firing for which the kiln is not intended (such as salt glaze).
• Corrosion caused by aggressive glazes or insufficient ventilation of the firing chamber.
• The manufacturer is not liable for any damage resulting from improper operation.
Important: Please fill in the GUARANTEE CARD and send it back immediately! Please note: If you do not send back
the Guarantee Card, we will not be able provide quick, free support in an event of damage.
Please note: The firebricks of the kiln lining are exposed to significant temperature fluctuations. This may cause
hairline cracks in the firebrick lining. This process is common and does not affect the functionality of the kiln. It can-
not therefore be accepted as a reason for complaint.
What to do in the case of warranty/damage:
Please notify us - before incurring any costs. After contacting the manufacturer, Helmut Rohde GmbH, your retailer
will then decide how to proceed.
If any claims arise, please state the kiln type, product number and the date of purchase or the year of construction
(see type plate on switch cabinet).
We refer to the General Terms and Conditions (version 04 / 2014) of Helmut Rohde GmbH.

10. PROPERTY RIGHTS / TRADE NAMES / DISCLAIMER

The contents of the instruction manual are purely informative. Changes may be made without prior notice and may
not be seen as a liability of Helmut Rohde GmbH. We do not guarantee or accept responsibility for the correctness
or precision of the contents in this instruction manual.
We mention names, trade names, product identifications etc. without special identification, as they are generally
known. Those names and identifications, however, may be the property of companies or institutions and subject to
copyright.
30
Page of 80
Brennöfen und Maschinen für Keramik, Glas und Metall
SN:
Modell / Model:
KE 150 S # 34388
Spannung / Voltage: Strom / Current:
3/N/PE AC 400 V
16 A
Maximale Betriebstemperatur /
1320 °C
Maximum operating temperature:
Helmut Rohde GmbH
Ried 9
D - 83134 Prutting
Baujahr / Y. O. M.:
03 / 2013
Leistung / Power:
10,5 kW
Frequenz:
50 Hz
CE
Status: 01 / 2016