Virax Mini VISIOVAL Manuel D'utilisation page 25

8. Troubleshooting
Problem
Apparently inaccurate
temperature reading
Thermal image doesn't align
with true image
limited thermal properties
registered on LCD
Washed out Thermal
properties on LCD
Unit is non-responsive
(turning on)
Thermal reflections shown on
surface
9. Accessories
Item
Inspection camera Mini VISIOVAL
16m CABLE for Mini VISIOVAL
Locator
10. Disposal
The components of the device are recyclable and must be disposed of accordingly. Registered
and fully qualified companies are available for recycling. In order to dispose of non-recyclable
components in an environmentally friendly manner (electronic waste), please contact your local
authorities in charge of waste disposal.
For EU countries only:
Do not discard electrical devices with household waste. In compliance with the
European directive 2002/96/CE on waste of electrical and electronic equipment
and its implementation in national law, power tools which are no longer usable
must be collected separately and follow an appropriate and environmentally
friendly recycling process.
Possible cause
Improper emissivity for
surface being measured
Outside of optimal range
of thermal overlay
Max. / Min. Temp.
Settings are too close
together
Opacity setting is too low
/ showing minimal
thermal properties
Battery requires
additional charge
Polished surfaces reflect
thermal radiation
Solution
Refer to user guide / Emissivity Table
Refer to specification in manual (2m)
Adjust Max. / Min. Temp settings
apart to add range
Adjust the opacity setting to add
more thermal properties to the
overlay image
Plug base unit in for full charge refer
to user guide for either Mini Visioval
Product not suitable for measuring
highly polished surfaces which effect
Emissivity
Reference
294110
294121
294130
EN
25