Virax Mini VISIOVAL Manuel D'utilisation page 21

• Quick Picks (pre-selected settings for common material emissivity settings)
• Wood
Metal
Tile
• Wood has an average emissivity value of (0.86 / plywood or untreated –
unfinished texture)
• Metal has an average emissivity value of (0.46 / galvanized pipe)
• Tile has an average emissivity value of (0.94 / glazed floor tile)
• Brick has an average emissivity value of (0.93 / red brick)
• Plaster has an average emissivity value of (0.67 / gypsum wall board)
• Concrete has an average emissivity value of (0.95 / dry-cured concrete)
• Touch Quick Pick icon to automatically select that emissivity level / touch emissivity
button
• Icon will appear in lower left corner to confirm selection.
• For specific emissivity and highest degree of temperature accuracy, use
arrows to change in 0.01 increments.
• Refer to emissivity table in product manual (5.2)
• Touch emissivity button to save and lock in selection
(E) Display of Quick Pick emissivity
(F) Menu button
• Tools setting on Mini Visioval
• Select between camera or video modes (camera mode as default)
• SD card indicates SD card storage device in Mini Visioval / opens thumb-nail viewing of
saved images and video
• Refer to Mini Visioval manual for saved images / video
• Refer to Mini Visioval manual for audio sound bites
• Refer to Mini Visioval manual for deleting pic's / videos
Brick
Plaster
Concrete
again to lock in selection.
(SD Card for Picture /Video storage)
Note: Touch menu icon
SD card icon opens thumbnail view of saved images
to access SD card icon
EN
.
21