Dimensions; Technical Data; Accessories And Spare Parts; Transport And Storage - oventrop Regudis W-HTF Notice D'utilisation

Flush-mounted cabinet
3.2

Dimensions

1
Illust. 2: Dimensions of the flush-mounted cabinet
Item no. (1)
1341175 700
1341177 880
1341174 635
1341070 560
1341170 700
3.3

Technical data

Weight
Item no. 1341175
Item no. 1341177
Item no. 1341174
Item no. 1341070
Item no. 1341170
Material Steel sheet, galvanised
Colour
White RAL 9010, matt
4.

Accessories and spare parts

You can obtain spare parts and accessories from
specialist stores.
The following item is available as accessory:
• Cylinder lock with key (item no. 1401191)
134117580-V01.09.2020
2
3
(2) (3)
110 1440
110 1440
110 1440
150 980
110 980
23 kg
30.5 kg
25.5 kg
13.9 kg
15.6 kg
Accessories and spare parts
Illust. 3: Cylinder lock with key
5.

Transport and storage

Transport the product in its original packing.
Store the product under the following conditions:
Temperature range
Relative air humidity
Particles
Mechanical
influences
Radiation
Chemical influences
6.

Installation

6.1 Installation
1. Remove the door of the flush-mounted cabinet.
2. Adjust the feet of the flush-mounted cabinet to the
required height. Observe the height of the screed
when adjusting the feet. The screed surface should
be at least 1 cm above the lower edge of the plinth.
A height marking (see Illust. 4 on page 18) indi-
cating the distance between the floor and the lower
edge of the plinth will appear when extending the
feet. Adjust or fix the feet by loosening or tightening
the wing nuts.
-20°C to +60°C
Max. 95%
Store dry and free from dust
Protected from mechanical
agitation
Protected from UV-rays and
direct sunlight
Do not store together with
solvents, chemicals, acids,
fuels or similar substances
17