Control Panel (Tvm-2200 Model); Changing A Monitor Parameter; Hot Keys - Interlogix TVM-1700 Manuel D'utilisation

Press the UP or DOWN arrow to scroll through
the available sources, and press LEFT or
RIGHT arrow to confirm selection.
(*) = Hot key

Control panel (TVM-2200 model)

1. POWER Indicator
Shows both normal operation and power
management status with power LED.
POWER Button
Switches the monitor on and off.
2. Sensor window
Remote control. Receives signal from the
remote controller.

3. VOLUME (*)
Selects the menu.
Primary Function: Used to increase the volume.
Secondary Function: Moves cursor to the right
in the OSD window and increases the value of
any selected menu.

4. VOLUME (*)
Selects the menu.
Primary Function: Used to DECREASE the
volume.
Secondary Function: Moves cursor to the Left in
the OSD window and decreases the value of
any selected menu.
5. SELECT Button (*)
Used to select from different input sources.
Press the UP or DOWN arrow to scroll through
the available sources, and press LEFT or
RIGHT arrow to confirm selection.
6. MENU Button
Turns the OSD window on. Turns the OSD
window off and moves from sub menu to top
menu in the OSD window.

7. Up Button
Primary Function: Choose automatically the
proper horizontal position and vertical position
and size of the screen image.(PC mode)
EN 4
Secondary Function: Allows for vertical scrolling
in the OSD menu, and to INCREASE the value
of the selected menu function.
8 Button ( * )
Allows for Vertical scrolling in the OSD Menu,
and to DECREASE the value of the selected
submenu function.

Changing a monitor parameter

1. Press the MENU button on the front panel to
obtain the OSD menu screen.
2. Use Left-Right buttons to select the menu.
3. Use Down button to select the submenus.
4. Use Up-Down buttons to select a submenu
function.
5. Press SOURCE button, then using left-right
buttons you can make adjustments as
necessary
6. To exit, press MENU.

Hot keys

Selects signal in order. VGA
- HDMI - CAM
When there is no OSD, if
you press this ▲ (UP/AUTO)
button, you can use the best
display performance fit for a
current mode
When there is no OSD, you
can adjust the volume
directly
User Manual