CONCORD ultimax Instructions De Montage Et Mode D'emploi page 35

2. Front-facing installation (from 9 to 18 kg)
2.1
1
2
Important!
Front-facing installation is only
suitable from a body weight of
9 kg and without the pelvic
insert, see section 6.5!
Turn the rotary handle at the front
of the seat shell upwards (1) and
push the seat shell into the
upright position (2).
2.2
0014-07
Hold the seat shell with your
thumbs on the left and right side
and use your fingers to pull the
grey levers as far as they will go
in the direction of the arrow. Keep
the levers extended and lift the
seat shell upwards and out until
the green component is visible
above the snap mechanism.
Then release the levers and
remove the seat shell.
2.3
0017-06
Insert the base unit into the car
seat as illustrated. Position the
reboard wedge (green) as
shown.
0241-01
0010-04