Goobay 71360 Mode D'emploi page 15

• The surface must be stable.
Delivered mounting material is only for use with concrete or stone ceilings.
For other surfaces, use other dowels.
• The product must be attached absolutely straight.
• Plants, street lighting, reflective surfaces or randomly moving
objects must not be located in the detection range.
• The recommended mounting height is 2.2-4 m.
2. Drill 3 mounting holes in the ceiling by using suitable tools.
The product can be used as marking template.
3. Put fitting dowels into the mouting holes.
4. Tighten the product by a screwdriver.
5. Set the adjustments like shown in chapter 7.
6. Assemble the cover cap.
Fig. 8: Mounting place
Fig. 9: Mounting
16