Publicité
Les langues disponibles
Les langues disponibles
User manual
5
Installation
•
Let open cable ends ONLY assemble by experienced
electrician.
•
Cut off power supply before any work on the product,
switch off safety fuse and secure against reconnection.
•
Assure and check the absence of voltage before any
work on the product.
The power cord used should have a minimum cross section of 1.0 mm². The
following connections are made to the terminal block of the product.
1. Remove the cover cap.
2. Connect your product like shown.
The protective conductor should be connected first.
Fig. 7: Installation
3.
Fix all wire connections using a screwdriver.
4.
Insulate the connection against contact and moisture.
6
Mounting
•
Place and use tools safely.
•
Pay attention to current-carrying or other
lines, lying behind plaster and do not damage them!
1. Select the mounting place according to the following criteria:
15
Risk of electric shock
Risk of falling / Material damage
Publicité
Chapitres
