Burg Wächter TSE Set 5001 PINCODE Directives De Montage Et Mode D'emploi page 7

Structure
TSE BUSINESS 5000
Image
Battery status indication
Battery full
[ ] Battery empty
Function key
Entry into the menu for programming. In the menu, the keys "1" and "2"
are intended as a scroll function. Besides this, you can use this key to skip
always to the previous level of the menu.
On/Enter key
Activation of the keypad for code entry, or for entering the menu.
Fingerscan sensor (not with TSE 5001)
To open or register the particular finger.
Dear Customer,
Thank you very much for choosing the electronic lock system TSE 5000 by
BURG-WÄCHTER. This system has been developed and manufactured using
the latest technical potential and satisfies high security requirements.
The electronic cylinder can be used easily without any boring and installation
of cables in any door prepared for profile cylinder up to a door thickness
of 120 mm. The electronic cylinder is perfectly suitable for both new
installations and upgrading. Further, the BURG-WÄCHTER TSE 5000 system
will offer you a variety of possibilities, e.g. which indent media you may use.
Please read more to this on the following pages.
Important: Please read the entire User Manual before you start
programming.
Enjoy your new lock system.
TSE Set 5001 PINCODE
The electronic cylinder is operated with a 6-digit code. As an option, also the
radio controlled key TSE 5103 E-Key can be used.
TSE 5001 PINCODE functions (as standard)
– Total number of users: up to 48
– To each pincode user (except administrator) also an
E-Key can be assigned.
Optional locking media
– Radio controlled key TSE 5103 E-KEY
Time functions
– User timer (up to 24 different time windows) *
– Permanent timer (up to 16 different time windows) *
* (only together with an appropriate TSE software)
History function
– Storing of last 600 events
(readout by optional TSE software)
Administrator code
– Factory set to 1-2-3-4-5-6 (please be sure to modify)
Power supply
– 4 × MIGNON LR6 AA ALKALINE
Optical signaling
Optical signaling in the form of a LED is incorporated in the knob on the
inner side of the door. This LED informs you on the following:
– 1 × brief: lock has been opened
– 2 × brief: lock has been shut
– every 5 sec. 1 × brief: permanent opening activated
– 1 × brief, 1 × long, 2 sec. pause, repeated: lock in programming mode
– 5 × brief, 2 sec. pause, repeating at 20 sec. battery empty
English | 7