Gladiator Garageworks GEARLOFT GALS24M1KG Instructions D'assemblage page 9

3.
Connect the racks (4' x 4', 2' x 8')
P1
F1
P1
4' x 4'
F1
F4
F1
P1
Lay two rack sections upside down on the floor. Assemble the
rack sections (P1) together using M8 - 1.25 x 12 socket-head cap
screws (F1) (2) and M8 - 1.25 Rectangular nuts (F4) (2).
5.
Attach lower corner supports
P4
F1
Attach the four lower corner supports (P4) to the rack corners
using M8 - 1.25 x 12 socket-head cap screws (F1) (8).
F4
F1
M8 - 1.25 x 12 Socket-head
cap screw
F4
M8 - 1.25 Rectangular nut
P1
F4
F1
2' x 8'
F1
M8 - 1.25 x 12 Socket-head
cap screw
P1
4.
Attach the rack brackets (4' x 4')
P7
P1
Attach the rack connection brackets (P7) to both sides of the two
bolted-together rack sections using M8 - 1.25 x 12 socket-head
cap screws (F1) (8).
6.
Attach lower center supports (2' x 8')
P1
P6
P1
F1
Attach the two lower center supports (P6) to the rack assembly
using M8 - 1.25 x 12 socket-head cap screws (F1) (4).
P1
F1
M8 - 1.25 x 12 Socket-head
cap screw
F1
F1
M8 - 1.25 x 12 Socket-head
cap screw
9