Complete Installation Checklist - Whirlpool W10240438B Instructions D'installation

COMPLete INstaLLatION
CheCKLIst
Check electrical requirements. Be sure you have correct
■
electrical supply and recommended grounding method.
See "Electrical Requirements".
Check that all parts are now installed. If there is an extra
■
part, go back through steps to see what was skipped.
Check that you have all of your tools.
■
Keep the foam packing ring from the washer tub for future
■
relocation of the washer. Dispose of/recycle all packaging
materials.
Check that both water faucets are on.
■
Check for leaks around faucets and inlet hoses.
■
Remove film from console and any tape remaining
■
on washer.
Check that washer is plugged into a grounded
■
3 prong outlet.
Read "Washer Use" in your "Use and Care Guide".
■
To test and clean your washer, measure 1/2 of normal
■
recommended amount of High Efficiency (HE) powdered
or liquid detergent for a medium-size load and pour it into
detergent dispenser. Close lid. Press POWER. Select
a normal cycle and press Start. Allow it to complete
one whole cycle.
9