USRobotics 56K USB Faxmodem Guide D'installation Rapide page 8

English
2. Use the provided telephone cord to connect the jack labelled
"TELCO" to an analogue telephone wall jack.
C a u ti o n : Use an analogue phone line only. The modem will be
When you are not using the modem, you can use a telephone by plug-
ging the telephone's cord into the jack labelled "PHONE".
Step Three: Install the drivers
Windows Vista
You must be in logged in as an administrator in order to install this
modem.
1. When the Found New Hardware Wizard appears, select Locate and
install driver software (recommended).
2. If prompted for permission, click Continue.
4
damaged if you connect it to a digital phone line.
Most office phones are wired through digital lines. If
you do not know whether you phone line is analogue
or digital, consult your telephone service provider or
building facilities department.