Returned Goods Procedure; Guarantee Certificate - aqua TECHNOPOOL PH-RX Manuel D'installation

6.0 Returned goods procedure

The product must be sent back to the Manufacturer packed into it's own packaging, with all
original protections, within the guarantee period.
The dosing pump must be properly washed with water in order to remove the chemical
residuals from internal parts.
The electrode must be packed into it's own original box and provided by the protection cap
duly filled in water.
If the above mentioned conditions will not be respected , the Manufacturer disclaim all
responsibility for eventual damages occurred during transport.

7.0 Guarantee certificate

the Manufacturer guarantee the products for 24 months from the shipment date to the first
Customer.
During this period the Manufacturer will supply for free those components that, upon
verification by the Manufacturer or an Authorized distributor, might reveal defective; the
Manufacturer reserve the right to repair or to replace the defective product.
The Manufacturer will not be responsible for any other claim by the customer for any direct
or indirect damages caused by the use or by the impossibility to use, totally or partially,
the product. ; from this guarantee are excluded all components subject to normal wear and
tear, such as valves, gaskets, fittings, ring nuts, tubes, filters, valve injection, probes,
electrodes and components in glass.
The reparation or replacement do not extend or renew the warranty period.
All expenses related to assembling and disassembling of the apparatus, transport, and
used materials (filters, valves, etc.), remain at customer' cost.
The reparation or replacement warranty right decade in following cases:
- The pump have not been used according to the instructions specified by the
Manufacturer.
- The pump have been repaired, disassembled or modified by entity NON authorized by
the Manufacturer.
- Non original spare parts have been used.
- The injection line have been damaged by using incompatible products.
- The electrical circuit board have been damaged by any external factor, i.e.: high-
tension.
24 months after the delivery date the Manufacturer will be free from all above mentioned
obligations.
After the implementation of the European Directive 2002/96/EU in the national legal system, the
following applies:Electrical and electronic devices may not be disposed of with domestic waste.
Consumers are obliged by lak to return electrical and electronic devices at the end of their
service lives to the public collecting points set up for this purpose. Detalis to this are defined by
the national law of the respective country. This symbol on the product, the instruction manual or
the package indicates that the product is subject to these regulations. By recycling, reusing the
material or other forms of utilising old devices, you are making an important contribution to
protecting our environment
A-TECHNOPOOL PH-RX 28/06/2010 13/64