Troubleshooting Guide; Technical Specifications - Swann Maxi-Brite PNP-150 Instructions D'utilisation

Troubleshooting Guide

Problem: I can't see the camera on my TV.
Solution: Ensure the camera is plugged in and the TV or VCR is tuned to the
correct input channel.
Problem: When I view my camera at night I only see a bright spot and no image.
Solution: Night Vision will reflect when shining through a window. Move the
camera to the other side of the window or another location.
Problem: The BNC Extension Cable will not connect to my TV.
Solution: Connect the BNC to RCA adapter to the end of the Extension Cable
and plug into the TV.
Problem: On my Swann DVR, Video Loss appears where my camera should be.
Solution: Check the Extension cable is securely connected to the camera and
check the connection is secure on the back of the DVR. Also ensure the camera
has power by trying a second power outlet.

Technical Specifications

Video
Image Sensor
Video Quality
Number of Effective Pixels
Minimum Illumination
Day/Night Mode
White Balance
Signal / Noise Ratio
Electronic Shutter
Gain Control
Backlight Compensation
Lens
Viewing Angle
Night Vision
Number of Infra-Red LEDs
Infra-Red Wavelength
Night Vision Distance
Infra-Red LED Life
General
Operating Power
Operating Temperature
Body Construction
Dimensions - Camera
Dimensions – Stand
Weight – Camera & Stand
1/3" Color Super CMOS
400 TV Lines
NTSC: 510 x 492 / PAL: 628 x 582
0 Lux (IR on)
Color during day / switches to B&W night
Automatic
> 50dB
1/60 - 1/15,000 NTSC / 1/50 - 1/15,000 PAL
Automatic
Yes
6mm
53 degrees
30
850nm
Up to 30ft / 9m
10,000 hours
DC 12V
-10°C ~ 50°C / 14°F ~ 122°F
ABS Plastic
5.5" x 2.8" x 2.8" / 140mm x 70mm x 70mm
4.5" x 2.3" x 2.3"/ 120mm x 60mm x 60mm
0.5lbs / 235g
7 7