BEBE CONFORT FamilyFix Mode D'emploi page 14

Environment
Keep all plastic packaging materials out of reach
of your child to reduce the risk of suffocation.
If you are no longer using this product, we ask
that, for the sake of the environment, you dispose
of the Bébé Confort FamilyFix in accordance with
local waste disposal regulations.
Questions
If you have any questions, contact your local Bébé
Confort retailer (see www.Bébé Confort.com for
contact information). Make sure you have the
following information on hand:
- S erial number at the bottom of the orange
ECE sticker
- T ype and make of car and seat on which the
Bébé Confort FamilyFix is used
- Age (length) and weight of your child
Warranty
We guarantee that this product was manufac-
tured in accordance with the current European
safety requirements and quality standards which
are applicable to this product, and that this
product is free from defects in workmanship and
material at the time of purchase. During the
production process the product was subjected to
various quality checks.
16
EN
If this product, despite our efforts, shows a
material/manufacturing fault within the warranty
period of 24 months, (with normal use as
described in the user instructions) we will comply
with the warranty terms and conditions. In this
case please contact your dealer. For extensive
information on applying the warranty terms and
conditions, you can contact the dealer or look on
our website: www.bebeconfort.com.
The warranty is not valid in the following
cases:
• I n case of a use or purpose other than
described in the manual.
• I f the product is submitted for repair through
a dealer that is not authorized by us.
• I f the product is not supplied to the
manufacturer with the original purchase
receipt (via the retailer and/or importer).
• I f repairs were carried out by third parties or a
dealer that is not authorized by us.
• I f the defect is the result of improper or
careless use or maintenance, negligence or
impact damage to the fabric cover and/or
frame.
• I f the parts show normal wear and tear that
may be expected from daily use of a product
(wheels, rotating and moving parts etc.)