Domo DO9236J Mode D'emploi page 24

1
4
USE
1. Install the appliance as described in the 'Installation' section.
2. Place the appliance on a flat, stable surface with the control button towards you. Make sure the dial
is set to 0. Unwind the power cord and put the plug into a power socket.
3. Place the measuring cup under the juice dispenser (1) and remove the pusher (2).
4. Wash and peel the vegetables or fruit you want to juice. Remove any piths and seeds. If necessary,
cut the food so that it fits into the fill opening.
5. Put the food in the fill opening. Slide the pusher back into the fill opening.
6. Turn the control button to the left.
· 0 = off
· I = standard speed for softer fruits and vegetables
· II = high speed for harder fruits and vegetables
7. Gently push the pusher down. Attention: do not press the pusher too hard, this can affect the result
and damage the sieve.
8. When you have finished juicing, turn the control button to the off position "0". Wait until the sieve
has stopped rotating. After use, unplug the plug from the power socket.
9. Disassemble the appliance. Unclasp the brackets (1), remove the lid (2) and remove the pulp
container from the base (3). Empty the pulp container.
10. Clean the parts immediately after use.
24
DO9236J
2
5
3
6