Switching The Appliance On; Operating Tips - CONSTRUCTA CE7EW3 Série Mode D'emploi

en
Fig. !
* Not all models.
1–4 Controls
5 NoFrost System
6* Freezer compartment flap
7 Glass shelf
8 Frozen food container (small)
9 Frozen food container (large)
10 Height-adjustable feet
11 Door ventilation
Controls
Fig. "
1
On/Off button
Serves to switch the whole
appliance on and off.
2
Temperature display
Indicates the set temperature of
the freezer compartment.
3
Display super freezing
Illuminates when super freezing is
on.
4
Temperature selection button
The required temperature is set
with this button.
28
Switching the
appliance on
Fig. "
Switch on the appliance with the On/Off
button 1.
A warning signal sounds. Temperature
display 2 is flashing.
Press the temperature setting button 4.
The warning signal switches off.
When the freezer compartment has
reached the set temperature, the
temperature display 2 is lit.
We recommend a factory setting of
-18 °C in the freezer compartment.

Operating tips

After the appliance has been switched
■
on, it may take several hours until
the set temperature has been
reached. Do not put any food
in the appliance beforehand.
The fully automatic NoFrost system
■
ensures that the freezer compartment
remains free of ice. Defrosting is not
required.
The sides of the housing are
■
sometimes heated slightly. This
prevents condensation in the area
of the door seal.
If the freezer compartment door
■
cannot be immediately re-opened after
it has been closed, wait until
the resulting low pressure has
equalised.