Astralpool 51297 Manuel D'installation page 6

In order to choose the colours of the sequence press the button 1 and choose the first colour by the iris-bar. Repeat for all five
colours.
Functions:
· Flash (button 6-ON): short switch off between the colours.
. Square (button 7-ON): changing the colours without swithing off.
· Fadder (button 8- ON): continous change of colour.
With the combination of button 7 and 8 we achieve more homogenous change of colour.
Speed:
4 different speeds can be chosen for the colour change.
· Maximum Speed: button 9 OFF, button 10 OFF
· Fast: button 9 OFF, button 10 ON
· Slow: button 9 ON, button 10 OFF
· Mínimum Speed: button 9, button 10 ON
Summary table:
FUNCTION
Flash
Square
Square + Fader
Continuous fader
7. ADDITIONAL CONTROL
The Touch Screen can be controlled by the push-button or the Remote Control.
Push-button:
To connect the Normally Opened Push-button (1NO) we must connect it between
BUS1 and BUS2 (see Fig.A).
Each press of the push-button changes to the following scene. Only this function is
allowed.
Remote Control LumiPlus:
It is necessary to purchase the LumiPlus Remote Control (41988) and antenna
(27818-0100).
The Remote Control is used to change the scenes (pressing the button Colour) or
switching the Touch Screen off (pressing the SLEEP button).The first time the
Remote Control is used it has to be linked with the antenna (and Touch Screen).
Steps for linking the Remote Control LumiPlus with the antenna (Touch Screen):
• Disconnect the supply (230Vac).
• Connected the antenna between BUS1 and BUS2 (2-wires cable with no polarity).
• Connect and turn on the touch screen with the ON/OFF button.
• With the screen lit, press and hold the ON/OFF button for 5 seconds (until buttons 1, 2 and 3 turn pink).
• Press button 1 and then any button from the Remote Control.
Steps for unlinking the Remote Control LumiPlus with the antenna (Touch Screen):
• With the screen lit, press and hold the ON/OFF button for 5 seconds (until buttons 1, 2 and 3 turn pink).
• Press button 2 to unlink the Remote Control.
Touch Screen RESET:
• With the screen lit, press and hold the ON/OFF button for 5 seconds (until buttons 1, 2 and 3 turn pink).
• Press button 3 to RESET.
Key 6 Key 7
Flash No flash
ON OFF
OFF ON
OFF ON
OFF OFF
Key 8
Fader OFF OFF
OFF 1/8s
OFF 1/2s
ON 15s
ON 15s
6
Key 9- Key 10
OFF-ON ON-OFF
1/6s 1/4s
1s 2s
30s 60s
30s 60s
ON-ON
1/3s
4s
120s
120s