Touch Screen Configuration - Astralpool 51297 Manuel D'installation

Sequence
To activate a colour sequence press the designed zone and press Play/Pause button.
Scene
Scene is a complete configuration of colours for all the zones.
In order to activate a scene press a LOAD button and the scene number (1-10).
Modifying and saving the scene:
· Press the LOAD button
· Choose the scene number (1-10)
· Modify the zone´s colour (by iris-bar)
· Press the LOAD button during 5 seconds, both buttons will turn on in pink.
Scence 1

6.TOUCH SCREEN CONFIGURATION

In this option the sequences can be programmed.
Attention: when saving a colour/sequence/scene it is not possible to recuperate the previous values, previous information is erased
In order to program a sequence press the zone number (1-10) to be programmed and PROG button.
The colours (up to 5), the function (flash, square, fadder) and time must be specified.
- The colours are chosen with the buttons 1-5,
- The functions are chosen with buttons 6, 7 and 8.
- The time of changing the colours is chosen with the buttons 9 and 10.
- To record the sequence, press Play/Pause
Choosing the colours:
2º
1º
2º
Scence 2
when saving. There are some pre-recorded scenes that may be of your interest.
Scence 3
5
1º