Setting The Date & Time; Setting Alarm 1 & Alarm 2 - Electrohome EAAC302 Manuel D'utilisation

OPERATING INSTRUCTIONS
3. To REACTIVATE DST/Summer Time, press and hold the DST/HA button for 3
seconds while the radio is OFF.
4. 'ON' will appear in the display to show that the Automatic DST/Summer Time
adjustment is reactivated. The display will return to the clock.
• The timing of Automatic DST/Summer Time employed by the unit (see above) is
subjected to variations by region and the law in each country/region. In such a
case, cancel the Automatic DST/Summer Time adjustment.
• If you live in a country/region that has not introduced Daylight Saving Time/
Summer Time, you must cancel Automatic DST/Summer Time adjustment before
using the unit.
SETTING THE DATE & TIME
To change the Date/Time, press and hold the
appear in the following order:
Year > Month > Day > 12/24 H > Hour > Minute
1. Press the button to DECREASE numbers or to toggle through settings
2. Press the button to INCREASE numbers or to toggle through the different settings.
3. To confirm your selection, press the
• The PM indicator will light up when time is set to PM; no light for AM,
• Pressing the or buttons once, decreases/increases one number at a
time.
• Pressing and holding the
numbers.
button. The settings below will
button once again.
or quickly decreases/increases the
- 14 -
OPERATING INSTRUCTIONS
SETTING ALARM 1 & ALARM 2
To set ALARM 1, press the button once to view current alarm setting then press and
hold the button and alarm time will flash; the settings below will appear in the
following order:
AL 1 Hour > AL 1 Min > AL 1 Alarm Modes > AL 1 Buzzer/Radio Selection
1. Press the or buttons to decrease/increase the HOUR; press the
button to confirm HOUR. The MINUTES will begin to flash.
2. Press the or buttons to decrease/increase the MINUTES; press the
button to confirm MINUTES. ALARM MODES will flash.
ALARM MODES allows you to set more than one alarm in a week i.e. ALARM 1 set to
wake you Monday-Friday and ALARM 2 set to wake you on weekends. The ALARM MODE
settings are as follows:
1-5 : Monday to Friday
1-7 : Whole week
3. Press the or buttons to toggle between the ALARM MODE settings; press
the button to confirm your selection. The Wake options will begin to flash.
4. Press the or buttons to toggle between the Wake options (AM*, FM* or
buzzer); press the button to confirm your selection.
5. If radio is selected please select an alarm
button to confirm your selection.
To set ALARM 2, press the button once to view current alarm setting then press and
hold the button and alarm time will flash; the settings below will appear in the
following order:
AL 2 Hour > AL 2 Min > AL 2 Alarm Modes > AL 2 Buzzer/Radio Selection
6-7 : Saturday & Sunday
1-1 : One day of week
or buttons & press the
- 15 -