Important Safety Information - Electrohome EAAC302 Manuel D'utilisation

IMPORTANT SAFETY INFORMATION

6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer's
instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide blade or the third prong is
provided for your safety. If the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Unplug this apparatus during lightning storms or when unused for long periods of
time.
13. Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or has
been dropped.
14. Apparatus shall not be exposed to dripping or splashing, and that not
objects filled with liquids, such as vases, shall be placed on the apparatus.
15. The batteries shall not be exposed to excessive heat such as sunshine, fire or the like.
16. The MAINS plug is used as the disconnect device, which shall remain readily
operable.
17. The MAINS plug of apparatus should not be obstructed and should be easily accessed
during intended use.
18. The apparatus shall be connected to a MAINS socket outlet with a protective earthing
connection.
19. WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to
rain or moisture.
20. There should be a minimum distance of 5cm around the apparatus for sufficient
ventilation.
21. The ventilation should not be impeded by covering the ventilation openings with
items such as newspaper, table-cloths, curtains etc.
22. No naked flame sources such as lighted candles should be placed on the apparatus.
23. Please use the apparatus in moderate climates.
- 4 -
IMPORTANT SAFETY INFORMATION
24. Unwind and straighten the power cord before use.
25. Damage Requiring Service
Unplug the power cord and refer servicing to qualified service professional under the
following conditions:
A. If liquid has been spilled on or into the product.
B. If the product has been exposed to rain, water, or other liquids.
C. If the product does not operate normally by following the operating instructions, adjust
only those controls that are covered by the operating instructions. Improper adjustment
of other controls may result in damage and will often require extensive work by a
qualified technician to restore the product to its normal operation.
D. If the product has been dropped or damaged in any way.
E. When the product exhibits a distinct change in performance. This may indicate a need
for service.
26. Servicing
Do not attempt to service this product yourself as opening or removing covers may expose
you to dangerous voltages or other hazards. Refer all servicing to a qualified service
professional.
27. Replacement Parts
When replacement parts are required, be sure the service technician has used replacement
parts specified by the manufacturer, or have the same characteristics as the original parts.
Unauthorized substitutions may result in fire, electric shock, or other hazards.
28. Safety Check
Upon completion of any service or repairs to this product, ask the service technician to
perform safety checks to determine that the product is in proper operating condition.
29. Caution marking is located at the back of apparatus.
30. The marking information is located at the bottom of apparatus.
FCC statement on regulation
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause
undesired operation.
- 5 -