Cycle Display; Radio Presets; Temperature; Troubleshooting - Electrohome EAAC302 Manuel D'utilisation

OPERATING INSTRUCTIONS

CYCLE DISPLAY

The CYCLE DISPLAY function displays the TIME, YEAR, MONTH/DAY & CURRENT
TEMPERATURE on the LED panel in sequence.
1. Press and hold the display button on the back of the alarm clock until 'ON'
appears on the LED panel. Please wait 10 seconds for the cycle to begin.
2. To return to TIME display only, press and hold
panel.

RADIO PRESETS

You can preset up to 20 radio stations in the memory; 10 AM and 10 FM stations.
button to turn the radio 'ON'.
1. Press the
2. When the radio is 'ON', press the
bands.
3. Use the or buttons to select the desired radio station.
4. Press and hold the SET button; 'P02' will blink in the display.
5. Use the or buttons to toggle to the desired preset 'P01-P10' number.
6. Press the SET button again to set the preset.
7. Repeat steps 2 through 6 to set more presets.
8. To recall a preset station, press the SET button to move UP through the presets
and the M - button to move DOWN through the presets until desired preset station
appears on the LED panel.

TEMPERATURE

1. Press once to view temperature, press again to hide.
2. Press to change between °C and °F when viewing temperature.
until 'OFF' appears on the LED
button to toggle between AM and FM radio
- 18 -

TROUBLESHOOTING

If you experience a problem with this unit, check the chart below before
contacting us for service.
SYMPTOM POSSIBLE CAUSE
Power does not come on AC cord not plugged in
No Sound Power is not on
VOLUME control at minimum
position
Noise or sound distorted AM-interference from traffic
on AM or FM
FM-antenna wire not extended Extend antenna wire
SYMPTOM POSSIBLE CAUSE
Incorrect Time Clock not set
Battery is inserted incorrectly,
or depleted
Alarm does not turn on Alarm is not set to turn on
Clock is not set
Alarm time is not set
No display Dimmer is set to Standby Mode Press Dimmer button

CARE AND MAINTENANCE

1. Disconnect the unit from any power sources before cleaning.
2. Keep the unit away from magnetic objects, water or heat sources.
3. Use a clean soft, damp cloth moistened with lukewarm water to clean the
cabinet. Never use chemical cleaners that could damage the finish of the unit.
POSSIBLE SOLUTION
GENERAL
Insert plug firmly into AC outlet
RADIO
Press the button
Turn the VOLUME control up
Turn the radio for better AM reception
POSSIBLE SOLUTION
CLOCK
Set the clock
Check/replace the battery
Press the button to set ALARM 1;
press the button to set ALARM 2
Set the clock
Set alarm time
- 19 -