Assembly Instructions - Gregster GRG-MR-010 Mode D'emploi

4. ASSEMBLY INSTRUCTIONS

1 34
35
Step 2
Slide the rail (45) into the U-shaped mount on the frame (1). Secure the rail using one
axis (41) and 2 sets of screws (34), spring washers (37) and washers (38). At the end,
reinsert the safety pin (35) into the front hole on the frame (1).
GRG-MR-010-IM-DE+GB+FR-05.indb 32-33
45
37
41
34
38
37
38
32
4. ASSEMBLY INSTRUCTIONS
40R
40L
53
43
42
42
36
34
45
1
3. Step 3
Slide the seat (53) onto the rail (45). Attach 2 rubber pads (36) to the rail (45) and secure
with 2 screws (34).
Attach 2 foot caps (55) to the rear stabilizer (54) before installing the rear stabilizer to the
runner. Secure the connection with 1 screw (19), 2 screws (42) and 3 washers (43). Then
attach 2 end caps (40 R/L) to the end of the rail (45).
34
36
54
19
55
55
43
33
21/6/2016 10:19 AM